17 Reasons Not To Be Ignoring Repairs To Upvc Windows
17 Reasons Not To Be Ignoring Repairs To Upvc Windows
Blog Article
Repairs to uPVC Windows
uPVC is a great choice for modern homes. They are easy to maintain and are durable and long-lasting. Unlike timber and aluminium, they are not susceptible to rust or rot.
It is important to clean and oil UPVC windows and doors on a regular basis. This will prevent unnecessary repair costs and improve energy efficiency.
1. Broken Glass
The damaged glass in your windows can cause significant damage to your home and may even be fatal. You should take the time to ensure that your windows are in good working order.
Single-pane windows are fairly simple to replace and generally fit into frames of the past easily. If you have double-paned windows which are joined by internal beading, it is difficult to remove and replace the old panes. In this instance you'll need locate some plastic spacers that aid the new pane in being able to fit properly into the window frame.
If you are going to attempt to remove the glass panes yourself it is important to wear the appropriate safety equipment that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a drop cloth prior to when you start working on the glass so that any shards fall on the fabric instead of landing on the floor where they could be trodden under and cause further damage.
It's a great idea cover the gap with tape after the glass has been removed. This will keep water and drafts from entering your property until a professional arrives to fix the window. It also acts as a barrier, deterring any intruders to gain access to your home. If the gap is large, you may be interested in a security door that has an integrated window, as this will offer the best of both worlds.
2. Sagging
Upvc is a long-lasting and energy efficient alternative to timber sash window. As time passes, they may develop a variety of issues that include sliding. A sagging uPVC windows could cause issues with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it is important to act swiftly to prevent the problem from getting worse.
To repair a window that is sagging, you can try to reposition the hinges. To accomplish this, you'll need to open the window so that you can access the frame. Then, using the screwdriver, you'll be able to remove the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after you've repositioned your hinges. If you are happy with the fit of your window, you can tighten screws to keep them in the right position.
If you cannot reposition the hinges, you could need to replace the seal. As time passes, rubber seals lose their elasticity and dry out, which causes them to lose tightness. It is important to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.
uPVC handles may also loosen. Most often it is due to screws that have become loose over time. However, it can occur because the handle mechanism has worn out. Fortunately, it's easy to fix the handle of a window that is loose yourself. First, you'll need close your window and do a test to ensure that it fits. The corners of the sash must align with the casing joint. If it does not, you can use the screwdriver to loosen the handle. Then turn the mechanism back into place.
3. Water Leaks
It is crucial to act if you awake each day to discover mouldy walls and floors that are click here wet. Water leaks through windows can cause structural damage to your home and impact your ability to regulate the temperature of your home. Most read more of the time, uPVC window leaks are caused by damaged or missing sealant.
This is a relatively easy fix and should be undertaken by any skilled DIYer. Depending on how serious the issue is, old caulking may have to be removed. It is important to keep in mind that when it comes to uPVC window repairs you should not be tempted to 'over-caulk in order to make the area harder to clean and can reduce the efficiency of your energy.
Make sure that the drainage holes are free of debris in them, and also ensure that the sill pan has been properly angled to drain away from the window. In more extreme situations, you may have to replace the window.
Other indicators of long-term water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and can spread quickly throughout the house.
If the leakage is occurring between the double-glazed window, it is more likely that the issue is more with the seal rather than the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.
4. Faulty Hinges
If your uPVC windows are brittle to open, or loose and open with a breeze it could be hinges that are at the fault. They can be easily repaired by any DIYer who is skilled and can be done within a few minutes.
Almost every household in the UK will have either top hung or side-hung uPVC windows that use hinges and, just like any mechanical component they will wear out over time. It's very simple to change a window hinge however it is easier if someone helps you to hold the frame.
It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. You can do this by checking for the arrows on each hinge, this indicates the direction in which the window should be opened.
The issue can be caused by opening the window improperly or a faulty installation at the factory. It is usually possible to fix the issue by sending us a photo on our website. We will be more than happy to give you advice.
Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant to the hinges is a great method to accomplish this. We recommend using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more smoothly. It can also reduce the possibility of a window sticking and help prevent corrosion. It is recommended to do this once a year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC window.
5. Draughts
Draughts can be caused by a variety of different things. The hinges can also become unbalanced due to wear, creating gaps where the sash and frame meet. These can be easily fixed by giving them a good clean, but when they're beyond repair, it may be necessary to get them aligned or replaced. Second, the interlock can also become unbalanced. This happens on the hinge's side, and may need to be cleaned. In certain instances it is possible to replace them.
The next most common reason for draughts is window seals. These can become worn down or damaged over time, and let air escape through these gaps. Replacement of these with high-quality weatherstripping is a good way to stop draughts. Replace the windows made of upvc with low-emissivity glass. This will help to regulate indoor temperatures and read more lessen draughts.
The last way to reduce draughts effectively is by using a draught-excluder. These are typically fabric tubes filled with a filler, which can be placed over your window sill. They can help keep cold air out and keep your home warm and cosy!
With a bit of regular maintenance and repair windows made of upvc will continue website to provide a great level of insulation and security for your home. It is crucial to keep in mind that all windows will eventually wear out and it could be cheaper to replace them instead of fixing them. If you are experiencing issues with your click here window made of upvc, it's best to consult a professional as soon as possible.